SE Bikes Quadangle Looptail 29"

It’s the return of the 29” Quadangle Looptail! The first version of the legendary Quadangle, with its groundbreaking frame design, was developed way back in 1979. We debuted the first 29” version over ten years ago in 2012. It’s been quite some time since we’ve had this bike in our line, so by popular demand, it’s time to bring it back! This bike is limited-edition and individually numbered with only 500 bikes will be available in North America. As always, the full Cr-Mo Quadangle Looptail frame is individually numbered and features a double down tube and Looptail rear end design. Parts-wise, the bike is outfitted with Cr-Mo Power Wing cruiser bars, sealed bearing Mohawk hubs, ODI Longneck grips, and 29” x 2.10” Vee Speedster tires. Make sure to scoop this bike up before it goes back into hiding. 

KEY FEATURES

• Full Cr-Mo Quadangle frame with a double downtube, Looptail rear end, and retro dropouts
• Individually numbered on the inside of the rear dropout
• Full Cr-Mo Landing Gear forks
• Cr-Mo Power Wing cruiser bars
• Double-wall rims with high flange SE Mohawk flip flop hubs
• SE 3-piece V-Ridge cranks with alloy SE sprocket
• Authentic ODI Longneck grips, made in the USA
• Vee Speedster x SE Racing 29” x 2.10” tires
• SE Flyer seat with SE bottle opener brace
• SE Quadangle padset
• 31.6 pounds

SPECIFICATIONS

Color(s)	Sterling Silver
Frame	100% Cr-Mo Tubing, Classic Double Downtube Design, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
Fork	Landing Gear, Full Cr-Mo
Crankset	SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 33T Alloy SE Racing Sprocket
Pedals	SE Racing Beartraps
Chain	KMC S1
Wheelset	SE Mohawk Flip Flop Hubs, 36H High-Flange Alloy, w/ Double-wall Rims, 15T Freewheel, Stainless Spokes
Tires	Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
Brakeset	Tektro 855AL V-Brake, Linear Cable
Brake Levers	Tektro 316A, 2-Finger Alloy
Headset	Tange 1-1/8" Threadless
Handlebar	Cr-Mo Power Wing Cruiser Bar, 28" x 7", 12° Backsweep, 1° Upsweep
Stem	Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reac
Grips	ODI Longneck, Flangeless, w/ ODI Rubber End Plugs, Made in USA
Seat	SE Flyer Seat w/ Custom SE Bottle Opener Brace
Seatpost	Micro-Adjust Alloy, 27.2mm
Seat Clamp	SE Racing Champ Clamp, Alloy, 29.8mm Inner Diameter
Accessories	SE Racing Padset, Alloy Valve Caps
Weight	31.6 lbs / 14.4 kgs

GEOMETRY

	Suggested Rider Size	5'5"+ (165cm+)
A	Top Tube, Actual	24"
B	Seat Tube, Center To Top	16.9"
C	Seat Tube Angle	73°
D	Head Tube Angle	71°
E	Chainstay Length	17.9"
F	Wheelbase	44"
G	Bottom Bracket Height	11.5"
H	Standover	29.4"
	Stem	55mm
	Handlebar Width	28"
	Crank	175mm
	Wheel Size	29"
	Seat Post Diameter	27.2mm

All bikes purchased through Sgvbicycles MUST be assembled by a certified bike shop mechanic. If the bike is NOT built by a certified bike shop mechanic, any warranty will be VOID. We will request for an assembly receipt as proof of professional installation.